Jump to content

SC EP:1291 The Skookum Thermal


Recommended Posts

Posted

GrayBear who lives in Trout Lake, Washington writes "I've attached a thermal video that I believe shows a female Sasquatch. If you watch the beginning of the video on a large screen, you may notice a smaller thermal signature appear on the left side of the tree. You can see what appears to be glowing eyes before the figure backs behind the tree.

A moment later, the larger thermal signature emerges from the right side. A very large Sasquatch then bends down, and it appears that she may be picking something up. I refer to the larger figure as a female because of the apparent juvenile nearby.

Pay close attention to the size and proportions of the figure especially the large arms, hands, thighs, and torso. I was also able to enlarge a still frame from the video, and I believe I may have captured what looks like a face. I've attached that still image as well.

This occurred on Friday, May 1st. We returned to the area Saturday morning to review the site and found what appeared to be 15.6-inch footprints around the same tree where the Sasquatch was filmed. We went back again that night and experienced some additional high strangeness, including an X-shaped glyph that still has me completely baffled. Needless to say, it was quite a field-research weekend.

Take a close look at the still image and let me know if you see what I'm seeing. Follow the arm upward toward the shoulder and neck area. From there, you may be able to make out what appears to be a face. To me, it looks like the nose is glowing, followed by what appear to be the eyes and an ear.

I'd really like to hear what you think.

We're getting ready to head back out into the Gifford for another couple of days of field research, this time with thermal drones and audio equipment. We've had some unusual audio activity in the area previously, so we're going back to see what happens during our night walks.

Another field-research adventure is about to begin."

Listen to the Podcast

×
×
  • Create New...